dmesg - AMD Radeon Pro VII
Linux version 6.8.7-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.2.1 20240206 [revision 67ac78caf31f7cb3202177e6428a46d829b70f23], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.42.0.20240130-2) #1 SMP PREEMPT_DYNAMIC Thu Apr 18 07:12:38 UTC 2024 (5c0cf23)
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000004a83ffff] usable
BIOS-e820: [mem 0x000000004a840000-0x000000004c007fff] reserved
BIOS-e820: [mem 0x000000004c008000-0x000000004c181fff] ACPI data
BIOS-e820: [mem 0x000000004c182000-0x000000004d268fff] ACPI NVS
BIOS-e820: [mem 0x000000004d269000-0x000000004e68cfff] reserved
BIOS-e820: [mem 0x000000004e68d000-0x000000004fffffff] usable
BIOS-e820: [mem 0x0000000050000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000209fffffff] usable
NX (Execute Disable) protection: active
APIC: Static calls initialized
e820: update [mem 0x3e12f018-0x3e13fe57] usable ==> usable
e820: update [mem 0x3e12f018-0x3e13fe57] usable ==> usable
e820: update [mem 0x3e115018-0x3e12e857] usable ==> usable
e820: update [mem 0x3e115018-0x3e12e857] usable ==> usable
e820: update [mem 0x3e0fb018-0x3e114857] usable ==> usable
e820: update [mem 0x3e0fb018-0x3e114857] usable ==> usable
e820: update [mem 0x3e0e6018-0x3e0fa257] usable ==> usable
e820: update [mem 0x3e0e6018-0x3e0fa257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000003e0e6017] usable
reserve setup_data: [mem 0x000000003e0e6018-0x000000003e0fa257] usable
reserve setup_data: [mem 0x000000003e0fa258-0x000000003e0fb017] usable
reserve setup_data: [mem 0x000000003e0fb018-0x000000003e114857] usable
reserve setup_data: [mem 0x000000003e114858-0x000000003e115017] usable
reserve setup_data: [mem 0x000000003e115018-0x000000003e12e857] usable
reserve setup_data: [mem 0x000000003e12e858-0x000000003e12f017] usable
reserve setup_data: [mem 0x000000003e12f018-0x000000003e13fe57] usable
reserve setup_data: [mem 0x000000003e13fe58-0x000000004a83ffff] usable
reserve setup_data: [mem 0x000000004a840000-0x000000004c007fff] reserved
reserve setup_data: [mem 0x000000004c008000-0x000000004c181fff] ACPI data
reserve setup_data: [mem 0x000000004c182000-0x000000004d268fff] ACPI NVS
reserve setup_data: [mem 0x000000004d269000-0x000000004e68cfff] reserved
reserve setup_data: [mem 0x000000004e68d000-0x000000004fffffff] usable
reserve setup_data: [mem 0x0000000050000000-0x000000006fffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000209fffffff] usable
efi: EFI v2.7 by American Megatrends
efi: ACPI=0x4c181000 ACPI 2.0=0x4c181014 SMBIOS=0x4e3c2000 SMBIOS 3.0=0x4e3c1000 MEMATTR=0x45371018 ESRT=0x47ebdd98 MOKvar=0x46424000 RNG=0x4c052018
random: crng init done
efi: Remove mem45: MMIO range=[0x60000000-0x6fffffff] (256MB) from e820 map
e820: remove [mem 0x60000000-0x6fffffff] reserved
efi: Remove mem46: MMIO range=[0xfd000000-0xfe010fff] (16MB) from e820 map
e820: remove [mem 0xfd000000-0xfe010fff] reserved
efi: Not removing mem47: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
efi: Not removing mem49: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem50: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: System manufacturer System Product Name/PRIME X299-A, BIOS 3301 11/05/2020
tsc: Detected 3000.000 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x20a0000 max_arch_pfn = 0x400000000
MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0x5f000000-0xffffffff] usable ==> reserved
last_pfn = 0x50000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd160-0x000fd16f]
esrt: Reserving ESRT space from 0x0000000047ebdd98 to 0x0000000047ebddd0.
e820: update [mem 0x47ebd000-0x47ebdfff] usable ==> reserved
e820: update [mem 0x46424000-0x46425fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3e141000-0x411e6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000004C181014 000024 (v02 ALASKA)
ACPI: XSDT 0x000000004C180728 000104 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x000000004C17F000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000004C0C3000 0BB540 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000004D223000 000040
ACPI: FIDT 0x000000004C0C2000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000004C053000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x000000004C0C0000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x000000004C0BF000 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: APIC 0x000000004C0BE000 00071E (v03 ALASKA A M I 00000000 INTL 20091013)
ACPI: MIGT 0x000000004C0BD000 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: MSCT 0x000000004C0BC000 00004E (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PCAT 0x000000004C0BB000 000068 (v02 ALASKA A M I 00000002 INTL 20091013)
ACPI: PCCT 0x000000004C0BA000 00006E (v01 ALASKA A M I 00000002 INTL 20091013)
ACPI: RASF 0x000000004C0B9000 000030 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000004C0B8000 00006C (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000004C0B7000 000B70 (v03 ALASKA A M I 00000002 INTL 20091013)
ACPI: SVOS 0x000000004C0B6000 000032 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: WDDT 0x000000004C0B5000 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: OEM4 0x000000004C08B000 029A72 (v02 INTEL CPU CST 00003000 INTL 20160422)
ACPI: OEM1 0x000000004C080000 00ABCB (v02 INTEL CPU EIST 00003000 INTL 20160422)
ACPI: OEM2 0x000000004C06E000 011208 (v02 INTEL CPU HWP 00003000 INTL 20160422)
ACPI: SSDT 0x000000004C060000 00D427 (v02 INTEL SSDT PM 00004000 INTL 20160422)
ACPI: NITR 0x000000004C05F000 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
ACPI: SSDT 0x000000004C05E000 000C07 (v02 ALASKA A M I 00000000 INTL 20091013)
ACPI: LPIT 0x000000004C05D000 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000004C05C000 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000004C058000 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000004C057000 000034 (v01 INTEL 01072009 MSFT 0000005F)
ACPI: DBG2 0x000000004C056000 000054 (v00 INTEL 01072009 MSFT 0000005F)
ACPI: BGRT 0x000000004C055000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000004C054000 0000F8 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: Reserving FACP table memory at [mem 0x4c17f000-0x4c17f113]
ACPI: Reserving DSDT table memory at [mem 0x4c0c3000-0x4c17e53f]
ACPI: Reserving FACS table memory at [mem 0x4d223000-0x4d22303f]
ACPI: Reserving FIDT table memory at [mem 0x4c0c2000-0x4c0c209b]
ACPI: Reserving FPDT table memory at [mem 0x4c053000-0x4c053043]
ACPI: Reserving MCFG table memory at [mem 0x4c0c0000-0x4c0c003b]
ACPI: Reserving HPET table memory at [mem 0x4c0bf000-0x4c0bf037]
ACPI: Reserving APIC table memory at [mem 0x4c0be000-0x4c0be71d]
ACPI: Reserving MIGT table memory at [mem 0x4c0bd000-0x4c0bd03f]
ACPI: Reserving MSCT table memory at [mem 0x4c0bc000-0x4c0bc04d]
ACPI: Reserving PCAT table memory at [mem 0x4c0bb000-0x4c0bb067]
ACPI: Reserving PCCT table memory at [mem 0x4c0ba000-0x4c0ba06d]
ACPI: Reserving RASF table memory at [mem 0x4c0b9000-0x4c0b902f]
ACPI: Reserving SLIT table memory at [mem 0x4c0b8000-0x4c0b806b]
ACPI: Reserving SRAT table memory at [mem 0x4c0b7000-0x4c0b7b6f]
ACPI: Reserving SVOS table memory at [mem 0x4c0b6000-0x4c0b6031]
ACPI: Reserving WDDT table memory at [mem 0x4c0b5000-0x4c0b503f]
ACPI: Reserving OEM4 table memory at [mem 0x4c08b000-0x4c0b4a71]
ACPI: Reserving OEM1 table memory at [mem 0x4c080000-0x4c08abca]
ACPI: Reserving OEM2 table memory at [mem 0x4c06e000-0x4c07f207]
ACPI: Reserving SSDT table memory at [mem 0x4c060000-0x4c06d426]
ACPI: Reserving NITR table memory at [mem 0x4c05f000-0x4c05f070]
ACPI: Reserving SSDT table memory at [mem 0x4c05e000-0x4c05ec06]
ACPI: Reserving LPIT table memory at [mem 0x4c05d000-0x4c05d093]
ACPI: Reserving WSMT table memory at [mem 0x4c05c000-0x4c05c027]
ACPI: Reserving SSDT table memory at [mem 0x4c058000-0x4c05b001]
ACPI: Reserving DBGP table memory at [mem 0x4c057000-0x4c057033]
ACPI: Reserving DBG2 table memory at [mem 0x4c056000-0x4c056053]
ACPI: Reserving BGRT table memory at [mem 0x4c055000-0x4c055037]
ACPI: Reserving DMAR table memory at [mem 0x4c054000-0x4c0540f7]
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x20 -> Node 0
SRAT: PXM 0 -> APIC 0x22 -> Node 0
SRAT: PXM 0 -> APIC 0x24 -> Node 0
SRAT: PXM 0 -> APIC 0x26 -> Node 0
SRAT: PXM 0 -> APIC 0x28 -> Node 0
SRAT: PXM 0 -> APIC 0x30 -> Node 0
SRAT: PXM 0 -> APIC 0x32 -> Node 0
SRAT: PXM 0 -> APIC 0x34 -> Node 0
SRAT: PXM 0 -> APIC 0x36 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x21 -> Node 0
SRAT: PXM 0 -> APIC 0x23 -> Node 0
SRAT: PXM 0 -> APIC 0x25 -> Node 0
SRAT: PXM 0 -> APIC 0x27 -> Node 0
SRAT: PXM 0 -> APIC 0x29 -> Node 0
SRAT: PXM 0 -> APIC 0x31 -> Node 0
SRAT: PXM 0 -> APIC 0x33 -> Node 0
SRAT: PXM 0 -> APIC 0x35 -> Node 0
SRAT: PXM 0 -> APIC 0x37 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x20ffffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x5fffffff] + [mem 0x100000000-0x209fffffff] -> [mem 0x00000000-0x209fffffff]
NODE_DATA(0) allocated [mem 0x209ffd4000-0x209fffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000209fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000004a83ffff]
node 0: [mem 0x000000004e68d000-0x000000004fffffff]
node 0: [mem 0x0000000100000000-0x000000209fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000209fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 15949 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x1808
ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-31
IOAPIC[2]: apic_id 10, version 32, address 0xfec08000, GSI 32-39
IOAPIC[3]: apic_id 11, version 32, address 0xfec10000, GSI 40-47
IOAPIC[4]: apic_id 12, version 32, address 0xfec18000, GSI 48-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0x45e14000-0x45fc4fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 36 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x3e0e6000-0x3e0e6fff]
PM: hibernation: Registered nosave memory: [mem 0x3e0fa000-0x3e0fafff]
PM: hibernation: Registered nosave memory: [mem 0x3e0fb000-0x3e0fbfff]
PM: hibernation: Registered nosave memory: [mem 0x3e114000-0x3e114fff]
PM: hibernation: Registered nosave memory: [mem 0x3e115000-0x3e115fff]
PM: hibernation: Registered nosave memory: [mem 0x3e12e000-0x3e12efff]
PM: hibernation: Registered nosave memory: [mem 0x3e12f000-0x3e12ffff]
PM: hibernation: Registered nosave memory: [mem 0x3e13f000-0x3e13ffff]
PM: hibernation: Registered nosave memory: [mem 0x45e14000-0x45fc4fff]
PM: hibernation: Registered nosave memory: [mem 0x46424000-0x46425fff]
PM: hibernation: Registered nosave memory: [mem 0x47ebd000-0x47ebdfff]
PM: hibernation: Registered nosave memory: [mem 0x4a840000-0x4c007fff]
PM: hibernation: Registered nosave memory: [mem 0x4c008000-0x4c181fff]
PM: hibernation: Registered nosave memory: [mem 0x4c182000-0x4d268fff]
PM: hibernation: Registered nosave memory: [mem 0x4d269000-0x4e68cfff]
PM: hibernation: Registered nosave memory: [mem 0x50000000-0x5fffffff]
PM: hibernation: Registered nosave memory: [mem 0x60000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0x60000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:36 nr_cpu_ids:36 nr_node_ids:1
percpu: Embedded 70 pages/cpu s249856 r8192 d28672 u524288
pcpu-alloc: s249856 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31
pcpu-alloc: [0] 32 33 34 35
PCIe ASPM is disabled
Unknown kernel command line parameters "showopts BOOT_IMAGE=/boot/vmlinuz-6.8.7-1-default splash=silent spectre_v2=off", will be passed to user space.
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 1146880 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 2097152 bytes
printk: early log buf free: 243296(92%)
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 32949676
Policy zone: Normal
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: area num 64.
Memory: 1166028K/133891400K available (16384K kernel code, 2959K rwdata, 12736K rodata, 4272K init, 4436K bss, 2470544K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=36, Nodes=1
ftrace: allocating 46930 entries in 184 pages
ftrace: allocated 184 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=36.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=36
NR_IRQS: 524544, nr_irqs: 1256, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
ACPI: Core revision 20230628
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000b5ffc000 flags: 0x0
DMAR: dmar0: reg_base_addr b5ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x000000d8ffc000 flags: 0x0
DMAR: dmar1: reg_base_addr d8ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
DMAR: dmar2: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x00000092ffc000 flags: 0x1
DMAR: dmar3: reg_base_addr 92ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000004d88f000 end: 0x0000004dad8fff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 12 under DRHD base 0xfbffc000 IOMMU 2
DMAR-IR: IOAPIC id 11 under DRHD base 0xd8ffc000 IOMMU 1
DMAR-IR: IOAPIC id 10 under DRHD base 0xb5ffc000 IOMMU 0
DMAR-IR: IOAPIC id 8 under DRHD base 0x92ffc000 IOMMU 3
DMAR-IR: IOAPIC id 9 under DRHD base 0x92ffc000 IOMMU 3
DMAR-IR: HPET id 0 under DRHD base 0x92ffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
APIC: Switched APIC routing to: cluster x2apic
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.00 BogoMIPS (lpj=10000000)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : off selected on command line.
RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
RETBleed: Vulnerable
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
TAA: Mitigation: TSX disabled
MMIO Stale Data: Mitigation: Clear CPU buffers
GDS: Mitigation: Microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64
x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512
x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024
x86/fpu: Enabled xstate features 0xff, context size is 2560 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 40K
pid_max: default: 36864 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
TOMOYO Linux initialized
LSM support for eBPF active
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM) i9-10980XE CPU @ 3.00GHz (family: 0x6, model: 0x55, stepping: 0x7)
RCU Tasks: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 3632
Estimated ratio of average max frequency by base frequency (times 1024): 1604
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35
MMIO Stale Data CPU bug present and SMT on, data leak possible. See for more details.
smp: Brought up 1 node, 36 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 36 processors activated (216086.00 BogoMIPS)
node 0 deferred pages initialised in 57ms
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x4c182000-0x4d268fff] (17723392 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 04:36:40, date: 2024-04-26
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1714106200.129:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: ECAM [mem 0x60000000-0x6fffffff] (base 0x60000000) for domain 0000 [bus 00-ff]
PCI: not using ECAM ([mem 0x60000000-0x6fffffff] not reserved)
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Dynamic OEM Table Load:
ACPI: Dynamic OEM Table Load:
ACPI: _OSC evaluated successfully for all CPUs
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PC00.LPC0.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: ECAM [mem 0x60000000-0x6fffffff] (base 0x60000000) for domain 0000 [bus 00-ff]
PCI: [Firmware Info]: ECAM [mem 0x60000000-0x6fffffff] not reserved in ACPI motherboard resources
PCI: ECAM [mem 0x60000000-0x6fffffff] is EfiMemoryMappedIO; assuming valid
PCI: ECAM [mem 0x60000000-0x6fffffff] reserved to work around lack of ACPI motherboard _CRS
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-15])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A08:00: host bridge window expanded to [mem 0xfd000000-0xfe7fffff window]; [mem 0xfd000000-0xfe7fffff window] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0x3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0x92ffffff window]
pci_bus 0000:00: root bus resource [bus 00-15]
pci 0000:00:00.0: [8086:2020] type 00 class 0x060000 PCIe Root Port
pci 0000:00:04.0: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.0: BAR 0 [mem 0x92f64000-0x92f67fff 64bit]
pci 0000:00:04.1: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.1: BAR 0 [mem 0x92f60000-0x92f63fff 64bit]
pci 0000:00:04.2: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.2: BAR 0 [mem 0x92f5c000-0x92f5ffff 64bit]
pci 0000:00:04.3: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.3: BAR 0 [mem 0x92f58000-0x92f5bfff 64bit]
pci 0000:00:04.4: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.4: BAR 0 [mem 0x92f54000-0x92f57fff 64bit]
pci 0000:00:04.5: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.5: BAR 0 [mem 0x92f50000-0x92f53fff 64bit]
pci 0000:00:04.6: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.6: BAR 0 [mem 0x92f4c000-0x92f4ffff 64bit]
pci 0000:00:04.7: [8086:2021] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:04.7: BAR 0 [mem 0x92f48000-0x92f4bfff 64bit]
pci 0000:00:05.0: [8086:2024] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.2: [8086:2025] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.4: [8086:2026] type 00 class 0x080020 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.4: BAR 0 [mem 0x92f6f000-0x92f6ffff]
pci 0000:00:08.0: [8086:2014] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:08.1: [8086:2015] type 00 class 0x110100 conventional PCI endpoint
pci 0000:00:08.2: [8086:2016] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 conventional PCI endpoint
pci 0000:00:14.0: BAR 0 [mem 0x92f30000-0x92f3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000 conventional PCI endpoint
pci 0000:00:14.2: BAR 0 [mem 0x92f6e000-0x92f6efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 conventional PCI endpoint
pci 0000:00:16.0: BAR 0 [mem 0x92f6d000-0x92f6dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 conventional PCI endpoint
pci 0000:00:17.0: BAR 0 [mem 0x92f68000-0x92f69fff]
pci 0000:00:17.0: BAR 1 [mem 0x92f6c000-0x92f6c0ff]
pci 0000:00:17.0: BAR 2 [io 0x3050-0x3057]
pci 0000:00:17.0: BAR 3 [io 0x3040-0x3043]
pci 0000:00:17.0: BAR 4 [io 0x3020-0x303f]
pci 0000:00:17.0: BAR 5 [mem 0x92f6b000-0x92f6b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1b.4: PCI bridge to [bus 02]
pci 0000:00:1b.4: bridge window [mem 0x92e00000-0x92efffff]
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0x92d00000-0x92dfffff]
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0x92c00000-0x92cfffff]
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2d2] type 00 class 0x060100 conventional PCI endpoint
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 conventional PCI endpoint
pci 0000:00:1f.2: BAR 0 [mem 0x92f44000-0x92f47fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 conventional PCI endpoint
pci 0000:00:1f.3: BAR 0 [mem 0x92f40000-0x92f43fff 64bit]
pci 0000:00:1f.3: BAR 4 [mem 0x92f20000-0x92f2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 conventional PCI endpoint
pci 0000:00:1f.4: BAR 0 [mem 0x92f6a000-0x92f6a0ff 64bit]
pci 0000:00:1f.4: BAR 4 [io 0x3000-0x301f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 conventional PCI endpoint
pci 0000:00:1f.6: BAR 0 [mem 0x92f00000-0x92f1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1987:5012] type 00 class 0x010802 PCIe Endpoint
pci 0000:02:00.0: BAR 0 [mem 0x92e00000-0x92e03fff 64bit]
pci 0000:00:1b.4: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:2142] type 00 class 0x0c0330 PCIe Legacy Endpoint
pci 0000:04:00.0: BAR 0 [mem 0x92d00000-0x92d07fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: PME# supported from D0
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330 PCIe Legacy Endpoint
pci 0000:05:00.0: BAR 0 [mem 0x92c00000-0x92c07fff 64bit]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: PME# supported from D0
pci 0000:05:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1c.6 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 16-63])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
acpi PNP0A08:01: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:16
pci_bus 0000:16: root bus resource [io 0x4000-0x7fff window]
pci_bus 0000:16: root bus resource [mem 0x93000000-0xb5ffffff window]
pci_bus 0000:16: root bus resource [bus 16-63]
pci 0000:16:00.0: [8086:2030] type 01 class 0x060400 PCIe Root Port
pci 0000:16:00.0: PCI bridge to [bus 17-19]
pci 0000:16:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:16:00.0: bridge window [mem 0xb5d00000-0xb5efffff]
pci 0000:16:00.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci 0000:16:00.0: PME# supported from D0 D3hot D3cold
pci 0000:16:05.0: [8086:2034] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:16:05.2: [8086:2035] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:16:05.4: [8086:2036] type 00 class 0x080020 PCIe Root Complex Integrated Endpoint
pci 0000:16:05.4: BAR 0 [mem 0xb5f00000-0xb5f00fff]
pci 0000:16:08.0: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.1: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.2: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.3: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.4: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.5: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.6: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:08.7: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.0: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.1: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.2: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.3: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.4: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.5: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.6: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:09.7: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0a.0: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0a.1: [8086:208d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.0: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.1: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.2: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.3: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.4: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.5: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.6: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0e.7: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.0: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.1: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.2: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.3: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.4: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.5: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.6: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:0f.7: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:10.0: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:10.1: [8086:208e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1d.0: [8086:2054] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1d.1: [8086:2055] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1d.2: [8086:2056] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1d.3: [8086:2057] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.0: [8086:2080] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.1: [8086:2081] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.2: [8086:2082] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.3: [8086:2083] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.4: [8086:2084] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.5: [8086:2085] type 00 class 0x088000 conventional PCI endpoint
pci 0000:16:1e.6: [8086:2086] type 00 class 0x088000 conventional PCI endpoint
pci 0000:17:00.0: [1002:14a0] type 01 class 0x060400 PCIe Switch Upstream Port
pci 0000:17:00.0: BAR 0 [mem 0xb5e00000-0xb5e03fff]
pci 0000:17:00.0: PCI bridge to [bus 18-19]
pci 0000:17:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:17:00.0: bridge window [mem 0xb5d00000-0xb5dfffff]
pci 0000:17:00.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci 0000:17:00.0: PME# supported from D0 D3hot D3cold
pci 0000:17:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:16:00.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:16:00.0: PCI bridge to [bus 17-19]
pci 0000:18:00.0: [1002:14a1] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0000:18:00.0: PCI bridge to [bus 19]
pci 0000:18:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:18:00.0: bridge window [mem 0xb5d00000-0xb5dfffff]
pci 0000:18:00.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci 0000:18:00.0: PME# supported from D0 D3hot D3cold
pci 0000:17:00.0: PCI bridge to [bus 18-19]
pci 0000:19:00.0: [1002:66a1] type 00 class 0x030000 PCIe Legacy Endpoint
pci 0000:19:00.0: BAR 0 [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:19:00.0: BAR 2 [mem 0xb0000000-0xb01fffff 64bit pref]
pci 0000:19:00.0: BAR 4 [io 0x7000-0x70ff]
pci 0000:19:00.0: BAR 5 [mem 0xb5d00000-0xb5d7ffff]
pci 0000:19:00.0: ROM [mem 0xb5d80000-0xb5d9ffff pref]
pci 0000:19:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:19:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:16:00.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:19:00.1: [1002:ab20] type 00 class 0x040300 PCIe Legacy Endpoint
pci 0000:19:00.1: BAR 0 [mem 0xb5da0000-0xb5da3fff]
pci 0000:19:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:18:00.0: PCI bridge to [bus 19]
pci_bus 0000:16: on NUMA node 0
ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 64-b1])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
acpi PNP0A08:02: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:64
pci_bus 0000:64: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:64: root bus resource [io 0x8000-0xbfff window]
pci_bus 0000:64: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:64: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:64: root bus resource [mem 0xb6000000-0xd8ffffff window]
pci_bus 0000:64: root bus resource [bus 64-b1]
pci 0000:64:00.0: [8086:2030] type 01 class 0x060400 PCIe Root Port
pci 0000:64:00.0: PCI bridge to [bus 65-67]
pci 0000:64:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:64:00.0: bridge window [mem 0xd8d00000-0xd8efffff]
pci 0000:64:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:64:00.0: PME# supported from D0 D3hot D3cold
pci 0000:64:05.0: [8086:2034] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:05.2: [8086:2035] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:05.4: [8086:2036] type 00 class 0x080020 PCIe Root Complex Integrated Endpoint
pci 0000:64:05.4: BAR 0 [mem 0xd8f00000-0xd8f00fff]
pci 0000:64:08.0: [8086:2066] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:09.0: [8086:2066] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.0: [8086:2040] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.1: [8086:2041] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.2: [8086:2042] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.3: [8086:2043] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.4: [8086:2044] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.5: [8086:2045] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.6: [8086:2046] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0a.7: [8086:2047] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0b.0: [8086:2048] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0b.1: [8086:2049] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0b.2: [8086:204a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0b.3: [8086:204b] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.0: [8086:2040] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.1: [8086:2041] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.2: [8086:2042] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.3: [8086:2043] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.4: [8086:2044] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.5: [8086:2045] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.6: [8086:2046] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0c.7: [8086:2047] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0d.0: [8086:2048] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0d.1: [8086:2049] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0d.2: [8086:204a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:64:0d.3: [8086:204b] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:65:00.0: [1002:14a0] type 01 class 0x060400 PCIe Switch Upstream Port
pci 0000:65:00.0: BAR 0 [mem 0xd8e00000-0xd8e03fff]
pci 0000:65:00.0: PCI bridge to [bus 66-67]
pci 0000:65:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:65:00.0: bridge window [mem 0xd8d00000-0xd8dfffff]
pci 0000:65:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:65:00.0: PME# supported from D0 D3hot D3cold
pci 0000:65:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:64:00.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:64:00.0: PCI bridge to [bus 65-67]
pci 0000:66:00.0: [1002:14a1] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0000:66:00.0: PCI bridge to [bus 67]
pci 0000:66:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:66:00.0: bridge window [mem 0xd8d00000-0xd8dfffff]
pci 0000:66:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:66:00.0: PME# supported from D0 D3hot D3cold
pci 0000:65:00.0: PCI bridge to [bus 66-67]
pci 0000:67:00.0: [1002:66a1] type 00 class 0x030000 PCIe Legacy Endpoint
pci 0000:67:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:67:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:67:00.0: BAR 4 [io 0xb000-0xb0ff]
pci 0000:67:00.0: BAR 5 [mem 0xd8d00000-0xd8d7ffff]
pci 0000:67:00.0: ROM [mem 0xd8d80000-0xd8d9ffff pref]
pci 0000:67:00.0: BAR 0: assigned to efifb
pci 0000:67:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:67:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:67:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:64:00.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:67:00.1: [1002:ab20] type 00 class 0x040300 PCIe Legacy Endpoint
pci 0000:67:00.1: BAR 0 [mem 0xd8da0000-0xd8da3fff]
pci 0000:67:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:66:00.0: PCI bridge to [bus 67]
pci_bus 0000:64: on NUMA node 0
ACPI: PCI Root Bridge [PC03] (domain 0000 [bus b2-ff])
acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
acpi PNP0A08:03: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:b2
pci_bus 0000:b2: root bus resource [io 0xc000-0xffff window]
pci_bus 0000:b2: root bus resource [mem 0xd9000000-0xfbffffff window]
pci_bus 0000:b2: root bus resource [bus b2-ff]
pci 0000:b2:00.0: [8086:2030] type 01 class 0x060400 PCIe Root Port
pci 0000:b2:00.0: PCI bridge to [bus b3]
pci 0000:b2:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:b2:00.0: PME# supported from D0 D3hot D3cold
pci 0000:b2:05.0: [8086:2034] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:b2:05.2: [8086:2035] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:b2:05.4: [8086:2036] type 00 class 0x080020 PCIe Root Complex Integrated Endpoint
pci 0000:b2:05.4: BAR 0 [mem 0xfbf00000-0xfbf00fff]
pci 0000:b2:12.0: [8086:204c] type 00 class 0x110100 PCIe Root Complex Integrated Endpoint
pci 0000:b2:12.1: [8086:204d] type 00 class 0x110100 conventional PCI endpoint
pci 0000:b2:12.2: [8086:204e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:b2:15.0: [8086:2018] type 00 class 0x088000 conventional PCI endpoint
pci 0000:b2:15.1: [8086:2088] type 00 class 0x110100 conventional PCI endpoint
pci 0000:b2:16.0: [8086:2018] type 00 class 0x088000 conventional PCI endpoint
pci 0000:b2:16.1: [8086:2088] type 00 class 0x110100 conventional PCI endpoint
pci 0000:b2:16.4: [8086:2018] type 00 class 0x088000 conventional PCI endpoint
pci 0000:b2:16.5: [8086:2088] type 00 class 0x110100 conventional PCI endpoint
pci 0000:b2:17.0: [8086:2018] type 00 class 0x088000 conventional PCI endpoint
pci 0000:b2:17.1: [8086:2088] type 00 class 0x110100 conventional PCI endpoint
pci 0000:b3:00.0: [1b21:1166] type 00 class 0x010601 PCIe Endpoint
pci 0000:b3:00.0: BAR 0 [mem 0xfbe82000-0xfbe83fff]
pci 0000:b3:00.0: BAR 5 [mem 0xfbe80000-0xfbe81fff]
pci 0000:b3:00.0: ROM [mem 0xfbe00000-0xfbe7ffff pref]
pci 0000:b3:00.0: PME# supported from D0 D3hot D3cold
pci 0000:b2:00.0: PCI bridge to [bus b3]
pci_bus 0000:b2: on NUMA node 0
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 14
ACPI: PCI: Interrupt link LNKD configured for IRQ 15
ACPI: PCI: Interrupt link LNKE configured for IRQ 3
ACPI: PCI: Interrupt link LNKF configured for IRQ 5
ACPI: PCI: Interrupt link LNKG configured for IRQ 6
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x16
ACPI: \_SB_.PC00.LPC0.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PC00.LPC0.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Passthrough
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x3e0e6018-0x3fffffff]
e820: reserve RAM buffer [mem 0x3e0fb018-0x3fffffff]
e820: reserve RAM buffer [mem 0x3e115018-0x3fffffff]
e820: reserve RAM buffer [mem 0x3e12f018-0x3fffffff]
e820: reserve RAM buffer [mem 0x45e14000-0x47ffffff]
e820: reserve RAM buffer [mem 0x46424000-0x47ffffff]
e820: reserve RAM buffer [mem 0x47ebd000-0x47ffffff]
e820: reserve RAM buffer [mem 0x4a840000-0x4bffffff]
pci 0000:19:00.0: vgaarb: setting as boot VGA device
pci 0000:19:00.0: vgaarb: bridge control possible
pci 0000:19:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:67:00.0: vgaarb: setting as boot VGA device (overriding previous)
pci 0000:67:00.0: vgaarb: bridge control possible
pci 0000:67:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0500-0x05fe] has been reserved
system 00:00: [io 0x0400-0x047f] has been reserved
system 00:00: [io 0x0600-0x061f] has been reserved
system 00:00: [io 0x0ca0-0x0ca5] has been reserved
system 00:00: [io 0x0880-0x0883] has been reserved
system 00:00: [io 0x0800-0x081f] has been reserved
system 00:00: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:00: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: [io 0x1854-0x1857] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
pnp 00:03: [dma 0 disabled]
system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:04: [mem 0xfe000000-0xfe00ffff] has been reserved
system 00:04: [mem 0xfe011000-0xfe01ffff] has been reserved
system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:05: [io 0x0f00-0x0ffe] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1f.1: [8086:a2a0] type 00 class 0x058000 conventional PCI endpoint
pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.4: PCI bridge to [bus 02]
pci 0000:00:1b.4: bridge window [mem 0x92e00000-0x92efffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0x92d00000-0x92dfffff]
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0x92c00000-0x92cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0x3fff window]
pci_bus 0000:00: resource 6 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 7 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: resource 8 [mem 0x70000000-0x92ffffff window]
pci_bus 0000:02: resource 1 [mem 0x92e00000-0x92efffff]
pci_bus 0000:04: resource 1 [mem 0x92d00000-0x92dfffff]
pci_bus 0000:05: resource 1 [mem 0x92c00000-0x92cfffff]
pci 0000:18:00.0: PCI bridge to [bus 19]
pci 0000:18:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:18:00.0: bridge window [mem 0xb5d00000-0xb5dfffff]
pci 0000:18:00.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci 0000:17:00.0: PCI bridge to [bus 18-19]
pci 0000:17:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:17:00.0: bridge window [mem 0xb5d00000-0xb5dfffff]
pci 0000:17:00.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci 0000:16:00.0: PCI bridge to [bus 17-19]
pci 0000:16:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:16:00.0: bridge window [mem 0xb5d00000-0xb5efffff]
pci 0000:16:00.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci_bus 0000:16: resource 4 [io 0x4000-0x7fff window]
pci_bus 0000:16: resource 5 [mem 0x93000000-0xb5ffffff window]
pci_bus 0000:17: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:17: resource 1 [mem 0xb5d00000-0xb5efffff]
pci_bus 0000:17: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
pci_bus 0000:18: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:18: resource 1 [mem 0xb5d00000-0xb5dfffff]
pci_bus 0000:18: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
pci_bus 0000:19: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:19: resource 1 [mem 0xb5d00000-0xb5dfffff]
pci_bus 0000:19: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
pci 0000:66:00.0: PCI bridge to [bus 67]
pci 0000:66:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:66:00.0: bridge window [mem 0xd8d00000-0xd8dfffff]
pci 0000:66:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:65:00.0: PCI bridge to [bus 66-67]
pci 0000:65:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:65:00.0: bridge window [mem 0xd8d00000-0xd8dfffff]
pci 0000:65:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:64:00.0: PCI bridge to [bus 65-67]
pci 0000:64:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:64:00.0: bridge window [mem 0xd8d00000-0xd8efffff]
pci 0000:64:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:64: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:64: resource 5 [io 0x8000-0xbfff window]
pci_bus 0000:64: resource 6 [io 0x03b0-0x03bb window]
pci_bus 0000:64: resource 7 [io 0x03c0-0x03df window]
pci_bus 0000:64: resource 8 [mem 0xb6000000-0xd8ffffff window]
pci_bus 0000:65: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:65: resource 1 [mem 0xd8d00000-0xd8efffff]
pci_bus 0000:65: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:66: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:66: resource 1 [mem 0xd8d00000-0xd8dfffff]
pci_bus 0000:66: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:67: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:67: resource 1 [mem 0xd8d00000-0xd8dfffff]
pci_bus 0000:67: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:b2:00.0: PCI bridge to [bus b3]
pci 0000:b2:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:b2: resource 4 [io 0xc000-0xffff window]
pci_bus 0000:b2: resource 5 [mem 0xd9000000-0xfbffffff window]
pci_bus 0000:b3: resource 1 [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: PME# does not work under D0, disabling it
pci 0000:05:00.0: PME# does not work under D0, disabling it
pci 0000:16:05.0: disabled boot interrupts on device [8086:2034]
pci 0000:17:00.0: CLS mismatch (64 != 32), using 64 bytes
pci 0000:19:00.1: D0 power state depends on 0000:19:00.0
pci 0000:64:05.0: disabled boot interrupts on device [8086:2034]
pci 0000:67:00.1: D0 power state depends on 0000:67:00.0
pci 0000:b2:05.0: disabled boot interrupts on device [8086:2034]
Trying to unpack rootfs image as initramfs...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000041371000-0x0000000045371000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 49816K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.SCK0.CP00: Found 2 idle states
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2024-04-26T04:36:42 UTC (1714106202)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: HWP enabled by BIOS
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
microcode: Current revision: 0x05003605
microcode: Updated early from: 0x05002f01
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2576668765, -2417112)->(2618339042, -44087389)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha256 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:943:616
clockevents: hash matches
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2028K
Freeing unused kernel image (initmem) memory: 4272K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (rodata/data gap) memory: 1600K
Run /init as init process
with arguments:
/init
showopts
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-6.8.7-1-default
splash=silent
spectre_v2=off
systemd[1]: systemd 255.4+suse.22.g56b53b17bc running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: Hostname set to .
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Reached target Initrd /usr File System.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Timer Units.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Socket Units.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Virtual Console Setup...
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd-journald[457]: Collecting audit messages is disabled.
tun: Universal TUN/TAP device driver, 1.6
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Preparation for Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Virtual Console Setup.
systemd[1]: Starting dracut ask for additional cmdline parameters...
systemd[1]: Started Journal Service.
cryptd: max_cpu_qlen set to 1000
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
tsc: Refined TSC clocksource calibration: 2999.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e44b2357, max_idle_ns: 440795324996 ns
clocksource: Switched to clocksource tsc
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
SCSI subsystem initialized
nvme nvme0: pci function 0000:02:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme0: Ignoring bogus Namespace Identifiers
nvme0n1: p1
alua: device handler registered
rdac: device handler registered
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
emc: device handler registered
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.8.7-1-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.8.7-1-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
libata version 3.00 loaded.
ahci 0000:00:17.0: version 3.0
xhci_hcd 0000:04:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.8.7-1-default xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.8.7-1-default xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
xhci_hcd 0000:05:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.8.7-1-default xhci-hcd
usb usb5: SerialNumber: 0000:05:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.8.7-1-default xhci-hcd
usb usb6: SerialNumber: 0000:05:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb: port power management may be unreliable
scsi host0: ahci
[drm] amdgpu kernel modesetting enabled.
scsi host1: ahci
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
scsi host2: ahci
scsi host3: ahci
amdgpu 0000:19:00.0: enabling device (0100 -> 0103)
[drm] initializing kernel modesetting (VEGA20 0x1002:0x66A1 0x1002:0x081E 0x06).
[drm] register mmio base: 0xB5D00000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
scsi host4: ahci
usb 1-1: new high-speed USB device number 2 using xhci_hcd
amdgpu 0000:19:00.0: amdgpu: Fetched VBIOS from ROM BAR
amdgpu: ATOM BIOS: 113-D1640600-104
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b100 irq 60 lpm-pol 0
ata2: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b180 irq 60 lpm-pol 0
ata3: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b200 irq 60 lpm-pol 0
ata4: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b280 irq 60 lpm-pol 0
ata5: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b300 irq 60 lpm-pol 0
ata6: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b380 irq 60 lpm-pol 0
ata7: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b400 irq 60 lpm-pol 0
ata8: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b480 irq 60 lpm-pol 0
ahci 0000:b3:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:b3:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode
ahci 0000:b3:00.0: flags: 64bit ncq sntf stag pm led clo only pio sxs deso sadm sds apst
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
scsi host15: ahci
scsi host16: ahci
scsi host17: ahci
scsi host18: ahci
scsi host19: ahci
scsi host20: ahci
scsi host21: ahci
scsi host22: ahci
scsi host23: ahci
scsi host24: ahci
scsi host25: ahci
scsi host26: ahci
scsi host27: ahci
scsi host28: ahci
scsi host29: ahci
scsi host30: ahci
scsi host31: ahci
scsi host32: ahci
scsi host33: ahci
scsi host34: ahci
scsi host35: ahci
scsi host36: ahci
scsi host37: ahci
scsi host38: ahci
scsi host39: ahci
ata9: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80100 irq 78 lpm-pol 0
ata10: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80180 irq 78 lpm-pol 0
ata11: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80200 irq 78 lpm-pol 0
ata12: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80280 irq 78 lpm-pol 0
ata13: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80300 irq 78 lpm-pol 0
ata14: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80380 irq 78 lpm-pol 0
ata15: DUMMY
ata16: DUMMY
ata17: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80500 irq 78 lpm-pol 0
ata18: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80580 irq 78 lpm-pol 0
ata19: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80600 irq 78 lpm-pol 0
ata20: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80680 irq 78 lpm-pol 0
ata21: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80700 irq 78 lpm-pol 0
ata22: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80780 irq 78 lpm-pol 0
ata23: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80800 irq 78 lpm-pol 0
ata24: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80880 irq 78 lpm-pol 0
ata25: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80900 irq 78 lpm-pol 0
ata26: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80980 irq 78 lpm-pol 0
ata27: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80a00 irq 78 lpm-pol 0
ata28: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80a80 irq 78 lpm-pol 0
ata29: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80b00 irq 78 lpm-pol 0
ata30: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80b80 irq 78 lpm-pol 0
ata31: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80c00 irq 78 lpm-pol 0
ata32: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80c80 irq 78 lpm-pol 0
ata33: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80d00 irq 78 lpm-pol 0
ata34: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80d80 irq 78 lpm-pol 0
ata35: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80e00 irq 78 lpm-pol 0
ata36: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80e80 irq 78 lpm-pol 0
ata37: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80f00 irq 78 lpm-pol 0
ata38: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe80f80 irq 78 lpm-pol 0
ata39: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe81000 irq 78 lpm-pol 0
ata40: SATA max UDMA/133 abar m8192@0xfbe80000 port 0xfbe81080 irq 78 lpm-pol 0
[drm] UVD(0) is enabled in VM mode
[drm] UVD(1) is enabled in VM mode
[drm] UVD(0) ENC is enabled in VM mode
[drm] UVD(1) ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:19:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] GPU posting now...
amdgpu 0000:19:00.0: amdgpu: MEM ECC is active.
amdgpu 0000:19:00.0: amdgpu: SRAM ECC is not presented.
amdgpu 0000:19:00.0: amdgpu: RAS INFO: ras initialized successfully, hardware ability[105] ras_mask[105]
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:19:00.0: amdgpu: VRAM: 16368M 0x0000008000000000 - 0x00000083FEFFFFFF (16368M used)
amdgpu 0000:19:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=16368M, BAR=256M
[drm] RAM width 4096bits HBM
[drm] amdgpu: 16368M of VRAM memory ready
[drm] amdgpu: 64244M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled.
[drm] PTB located at 0x0000008000000000
amdgpu: hwmgr_sw_init smu backed is vega20_smu
[drm] Found UVD firmware ENC: 1.2 DEC: .43 Family ID: 19
[drm] PSP loading UVD firmware
[drm] Found VCE firmware Version: 57.6 Binary ID: 4
[drm] PSP loading VCE firmware
[drm] reserve 0x400000 from 0x83fec00000 for PSP TMR
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.12
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usb 1-1: Manufacturer: GenesysLogic
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
amdgpu 0000:19:00.0: amdgpu: HDCP: optional hdcp ta ucode is not available
amdgpu 0000:19:00.0: amdgpu: DTM: optional dtm ta ucode is not available
amdgpu 0000:19:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:19:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[drm] Display Core v3.2.266 initialized on DCE 12.1
[drm] kiq ring mec 2 pipe 1 q 0
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 4 SControl 300)
ata4.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata3.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata5.00: ATA-10: WDC WD60EFAX-68JH4N1, 83.00A83, max UDMA/133
ata8.00: supports DRM functions and may not be fully accessible
ata8.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-11: Samsung SSD 870 QVO 8TB, SVQ01B6Q, max UDMA/133
ata8.00: NCQ Send/Recv Log not supported
ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata1.00: 15628053168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata8.00: Features: Trust
ata8.00: supports DRM functions and may not be fully accessible
ata8.00: NCQ Send/Recv Log not supported
ata8.00: configured for UDMA/133
ata6.00: ATA-10: ST6000VX001-2BD186, CV12, max UDMA/133
ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: ATA-10: ST6000VX001-2BD186, CV12, max UDMA/133
ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: Features: NCQ-prio
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata5.00: configured for UDMA/133
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
scsi 1:0:0:0: Direct-Access ATA ST6000VX001-2BD1 CV12 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 0A80 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
ata1.00: Enabling discard_zeroes_data
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
scsi 3:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 0A80 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
scsi 4:0:0:0: Direct-Access ATA WDC WD60EFAX-68J 0A83 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Preferred minimum I/O size 4096 bytes
scsi 5:0:0:0: Direct-Access ATA ST6000VX001-2BD1 CV12 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 5:0:0:0: [sdf] 4096-byte physical blocks
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] Preferred minimum I/O size 4096 bytes
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg6 type 0
sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdg] Preferred minimum I/O size 512 bytes
sd 1:0:0:0: [sdb] Attached SCSI disk
[drm] UVD and UVD ENC initialized successfully.
sdg: sdg1 sdg2
ata9: SATA link down (SStatus 0 SControl 300)
sd 7:0:0:0: [sdg] supports TCG Opal
sd 7:0:0:0: [sdg] Attached SCSI disk
sd 5:0:0:0: [sdf] Attached SCSI disk
sda: sda1
sdd: sdd1
sdc: sdc1
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[drm] VCE initialized successfully.
[drm] I2C busy !
[drm] TX was terminated, IC_TX_ABRT_SOURCE val is:1000001
[drm:smu_v11_0_i2c_xfer [amdgpu]] *ERROR* Received I2C_NAK_7B_ADDR_NOACK !!!
[drm:smu_v11_0_i2c_xfer [amdgpu]] *ERROR* WriteI2CData() - I2C error occurred :1
[drm:amdgpu_ras_eeprom_init [amdgpu]] *ERROR* Failed to read EEPROM table header, res:-5
amdgpu 0000:19:00.0: amdgpu: Failed to initialize ras recovery! (-5)
usb 2-1: New USB device found, idVendor=05e3, idProduct=0617, bcdDevice=92.12
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB3.0 Hub
usb 2-1: Manufacturer: GenesysLogic
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
amdgpu: HMM registered 16368MB device memory
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x66a1:0x1002]
kfd kfd: amdgpu: added device 1002:66a1
amdgpu 0000:19:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 16, active_cu_number 60
amdgpu 0000:19:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:19:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring page0 uses VM inv eng 1 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring sdma1 uses VM inv eng 4 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring page1 uses VM inv eng 5 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring uvd_0 uses VM inv eng 6 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring uvd_enc_0.0 uses VM inv eng 7 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring uvd_enc_0.1 uses VM inv eng 8 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring uvd_1 uses VM inv eng 9 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring uvd_enc_1.0 uses VM inv eng 10 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring uvd_enc_1.1 uses VM inv eng 11 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring vce0 uses VM inv eng 12 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring vce1 uses VM inv eng 13 on hub 8
amdgpu 0000:19:00.0: amdgpu: ring vce2 uses VM inv eng 14 on hub 8
amdgpu: Detected AMDGPU DF Counters. # of Counters = 8.
amdgpu: Detected AMDGPU 2 Perf Events.
[drm] Initialized amdgpu 3.57.0 20150101 for 0000:19:00.0 on minor 1
amdgpu 0000:19:00.0: [drm] Cannot find any crtc or sizes
[drm] initializing kernel modesetting (VEGA20 0x1002:0x66A1 0x1002:0x081E 0x06).
[drm] register mmio base: 0xD8D00000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c4000-0x000c7fff window]
caller pci_map_rom+0x7d/0x210 mapping multiple BARs
amdgpu 0000:67:00.0: No more image in the PCI ROM
amdgpu 0000:67:00.0: amdgpu: Fetched VBIOS from ROM BAR
amdgpu: ATOM BIOS: 113-D1640600-104
[drm] UVD(0) is enabled in VM mode
[drm] UVD(1) is enabled in VM mode
[drm] UVD(0) ENC is enabled in VM mode
[drm] UVD(1) ENC is enabled in VM mode
[drm] VCE enabled in VM mode
Console: switching to colour dummy device 80x25
ata10: SATA link down (SStatus 0 SControl 300)
amdgpu 0000:67:00.0: vgaarb: deactivate vga console
amdgpu 0000:67:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
amdgpu 0000:67:00.0: amdgpu: MEM ECC is active.
amdgpu 0000:67:00.0: amdgpu: SRAM ECC is not presented.
amdgpu 0000:67:00.0: amdgpu: RAS INFO: ras initialized successfully, hardware ability[105] ras_mask[105]
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:67:00.0: amdgpu: VRAM: 16368M 0x0000008000000000 - 0x00000083FEFFFFFF (16368M used)
amdgpu 0000:67:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=16368M, BAR=256M
[drm] RAM width 4096bits HBM
[drm] amdgpu: 16368M of VRAM memory ready
[drm] amdgpu: 64244M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled.
[drm] PTB located at 0x0000008000000000
amdgpu: hwmgr_sw_init smu backed is vega20_smu
[drm] Found UVD firmware ENC: 1.2 DEC: .43 Family ID: 19
usb 1-9: new full-speed USB device number 3 using xhci_hcd
[drm] PSP loading UVD firmware
[drm] Found VCE firmware Version: 57.6 Binary ID: 4
[drm] PSP loading VCE firmware
[drm] reserve 0x400000 from 0x83fec00000 for PSP TMR
usb 1-9: New USB device found, idVendor=2433, idProduct=b200, bcdDevice= 1.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: 690LC
usb 1-9: Manufacturer: ASETEK
usb 1-9: SerialNumber: CCVI_1.0
amdgpu 0000:67:00.0: amdgpu: HDCP: optional hdcp ta ucode is not available
amdgpu 0000:67:00.0: amdgpu: DTM: optional dtm ta ucode is not available
amdgpu 0000:67:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:67:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[drm] Display Core v3.2.266 initialized on DCE 12.1
ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata11.00: supports DRM functions and may not be fully accessible
ata11.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
ata11.00: NCQ Send/Recv Log not supported
ata11.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata11.00: Features: Trust Dev-Sleep
ata11.00: supports DRM functions and may not be fully accessible
ata11.00: NCQ Send/Recv Log not supported
ata11.00: configured for UDMA/133
scsi 10:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 10:0:0:0: [sdh] Write Protect is off
sd 10:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 10:0:0:0: [sdh] Preferred minimum I/O size 512 bytes
sdh: sdh1 sdh2
sd 10:0:0:0: [sdh] supports TCG Opal
sd 10:0:0:0: [sdh] Attached SCSI removable disk
usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[drm] kiq ring mec 2 pipe 1 q 0
usb 2-2: New USB device found, idVendor=0bda, idProduct=0301, bcdDevice= 1.16
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB3.0 Card Reader
usb 2-2: Manufacturer: Realtek
usb 2-2: SerialNumber: 201402131335
[drm] UVD and UVD ENC initialized successfully.
usb 1-11: new low-speed USB device number 4 using xhci_hcd
ata12: SATA link down (SStatus 0 SControl 300)
[drm] VCE initialized successfully.
[drm] TX was terminated, IC_TX_ABRT_SOURCE val is:1000001
[drm:smu_v11_0_i2c_xfer [amdgpu]] *ERROR* Received I2C_NAK_7B_ADDR_NOACK !!!
[drm:smu_v11_0_i2c_xfer [amdgpu]] *ERROR* WriteI2CData() - I2C error occurred :1
[drm:amdgpu_ras_eeprom_init [amdgpu]] *ERROR* Failed to read EEPROM table header, res:-5
amdgpu 0000:67:00.0: amdgpu: Failed to initialize ras recovery! (-5)
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host40: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
amdgpu: HMM registered 16368MB device memory
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x66a1:0x1002]
kfd kfd: amdgpu: added device 1002:66a1
amdgpu 0000:67:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 16, active_cu_number 60
amdgpu 0000:67:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:67:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring page0 uses VM inv eng 1 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring sdma1 uses VM inv eng 4 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring page1 uses VM inv eng 5 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring uvd_0 uses VM inv eng 6 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring uvd_enc_0.0 uses VM inv eng 7 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring uvd_enc_0.1 uses VM inv eng 8 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring uvd_1 uses VM inv eng 9 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring uvd_enc_1.0 uses VM inv eng 10 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring uvd_enc_1.1 uses VM inv eng 11 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring vce0 uses VM inv eng 12 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring vce1 uses VM inv eng 13 on hub 8
amdgpu 0000:67:00.0: amdgpu: ring vce2 uses VM inv eng 14 on hub 8
amdgpu: Detected AMDGPU DF Counters. # of Counters = 8.
amdgpu: Detected AMDGPU 2 Perf Events.
[drm] Initialized amdgpu 3.57.0 20150101 for 0000:67:00.0 on minor 2
fbcon: amdgpudrmfb (fb0) is primary device
usb 1-11: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
usb 1-11: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-11: Product: USB Optical Mouse
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Console: switching to colour frame buffer device 160x45
amdgpu 0000:67:00.0: [drm] fb0: amdgpudrmfb frame buffer device
ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata13.00: ATA-9: Seagate BarraCuda SSD ZA2000CM10002, STAS1024, max UDMA/133
ata13.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata13.00: Features: Dev-Sleep
ata13.00: configured for UDMA/133
scsi 12:0:0:0: Direct-Access ATA Seagate BarraCud 1024 PQ: 0 ANSI: 5
sd 12:0:0:0: Attached scsi generic sg8 type 0
sd 12:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 12:0:0:0: [sdi] Write Protect is off
sd 12:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 12:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 12:0:0:0: [sdi] Preferred minimum I/O size 512 bytes
sdi: sdi1
sd 12:0:0:0: [sdi] Attached SCSI removable disk
usb 1-12: new low-speed USB device number 5 using xhci_hcd
usb 1-12: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12: Product: USB Keyboard
usb 1-12: Manufacturer: Logitech
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:1BCF:0005.0001/input/input0
hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-11/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046D:C31C.0002/input/input1
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-12/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.1/0003:046D:C31C.0003/input/input2
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.1/0003:046D:C31C.0003/input/input3
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-12/input1
ata14: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
scsi 40:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 6
scsi 40:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 6
scsi 40:0:0:2: Direct-Access Generic- USB3.0 CRW -2 1.00 PQ: 0 ANSI: 6
scsi 40:0:0:3: Direct-Access Generic- USB3.0 CRW -3 1.00 PQ: 0 ANSI: 6
sd 40:0:0:0: Attached scsi generic sg9 type 0
sd 40:0:0:1: Attached scsi generic sg10 type 0
sd 40:0:0:2: Attached scsi generic sg11 type 0
sd 40:0:0:3: Attached scsi generic sg12 type 0
sd 40:0:0:0: [sdj] Media removed, stopped polling
sd 40:0:0:0: [sdj] Attached SCSI removable disk
sd 40:0:0:1: [sdk] Media removed, stopped polling
sd 40:0:0:1: [sdk] Attached SCSI removable disk
sd 40:0:0:2: [sdl] Media removed, stopped polling
sd 40:0:0:2: [sdl] Attached SCSI removable disk
sd 40:0:0:3: [sdm] Media removed, stopped polling
sd 40:0:0:3: [sdm] Attached SCSI removable disk
ata18: SATA link down (SStatus 0 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata20: SATA link down (SStatus 0 SControl 300)
ata21: SATA link down (SStatus 0 SControl 300)
ata22: SATA link down (SStatus 0 SControl 300)
ata23: SATA link down (SStatus 0 SControl 300)
ata24: SATA link down (SStatus 0 SControl 300)
ata25: SATA link down (SStatus 0 SControl 300)
ata26: SATA link down (SStatus 0 SControl 300)
ata27: SATA link down (SStatus 0 SControl 300)
ata28: SATA link down (SStatus 0 SControl 300)
ata29: SATA link down (SStatus 0 SControl 300)
ata30: SATA link down (SStatus 0 SControl 300)
ata31: SATA link down (SStatus 0 SControl 300)
ata32: SATA link down (SStatus 0 SControl 300)
ata33: SATA link down (SStatus 0 SControl 300)
ata34: SATA link down (SStatus 0 SControl 300)
ata35: SATA link down (SStatus 0 SControl 300)
ata36: SATA link down (SStatus 0 SControl 300)
ata37: SATA link down (SStatus 0 SControl 300)
ata38: SATA link down (SStatus 0 SControl 300)
ata39: SATA link down (SStatus 0 SControl 300)
ata40: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver uas
EXT4-fs (sdg2): mounted filesystem ea0a7ebf-3b8e-4690-b48a-6e179e9b47e7 ro with ordered data mode. Quota mode: none.
systemd-journald[457]: Received SIGTERM from PID 1 (systemd).
systemd[1]: systemd 255.4+suse.22.g56b53b17bc running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/redis.
systemd[1]: Created slice Slice /system/tinc.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Load AppArmor profiles...
systemd[1]: Stopping Entropy Daemon based on the HAVEGE algorithm...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: Starting Load Kernel Module nvme_fabrics...
systemd[1]: plymouth-start.service: Deactivated successfully.
systemd[1]: plymouth-start.service: Unit process 766 (plymouthd) remains running after unit stopped.
systemd[1]: Stopped Show Plymouth Boot Screen.
systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: haveged.service: Deactivated successfully.
systemd[1]: Stopped Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: Mounting Kernel Configuration File System...
loop: module loaded
fuse: init (API version 7.39)
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module loop.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
device-mapper: uevent: version 1.0.3
systemd[1]: Apply Kernel Variables for 6.8.7-1-default from /boot was skipped because of an unmet condition check (ConditionPathExists=!/usr/lib/modules/6.8.7-1-default/sysctl.conf).
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
systemd[1]: Starting Apply Kernel Variables for 6.8.7-1-default...
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module dm_mod.
systemd[1]: modprobe@nvme_fabrics.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module nvme_fabrics.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Apply Kernel Variables for 6.8.7-1-default.
systemd[1]: Starting Apply Kernel Variables...
EXT4-fs (sdg2): re-mounted ea0a7ebf-3b8e-4690-b48a-6e179e9b47e7 r/w. Quota mode: none.
systemd-journald[1084]: Collecting audit messages is disabled.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: One time configuration for iscsi.service was skipped because of an unmet condition check (ConditionPathExists=!/etc/iscsi/initiatorname.iscsi).
systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Starting Load/Save OS Random Seed...
systemd[1]: Started Journal Service.
systemd-journald[1084]: Received client request to flush runtime journal.
audit: type=1400 audit(1714106218.201:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/updatedb" pid=1137 comm="apparmor_parser"
audit: type=1400 audit(1714106218.204:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=1135 comm="apparmor_parser"
audit: type=1400 audit(1714106218.204:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1131 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-managesieve" pid=1152 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1124 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1124 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-log" pid=1151 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-doveadm-server" pid=1144 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-anvil" pid=1138 comm="apparmor_parser"
audit: type=1400 audit(1714106218.208:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-managesieve-login" pid=1153 comm="apparmor_parser"
systemd-journald[1084]: /var/log/journal/2e3002230f0c4994b885f53b302238fb/system.journal: Journal file uses a different sequence number ID, rotating.
systemd-journald[1084]: Rotating system journal.
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: button: Power Button [PWRF]
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 5.00
ioatdma 0000:00:04.0: enabling device (0004 -> 0006)
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i2c i2c-26: 8/8 memory slots populated (from DMI)
ioatdma 0000:00:04.1: enabling device (0004 -> 0006)
mei_me 0000:00:16.0: enabling device (0004 -> 0006)
input: PC Speaker as /devices/platform/pcspkr/input/input7
ioatdma 0000:00:04.2: enabling device (0004 -> 0006)
ioatdma 0000:00:04.3: enabling device (0004 -> 0006)
ioatdma 0000:00:04.4: enabling device (0004 -> 0006)
ioatdma 0000:00:04.5: enabling device (0004 -> 0006)
raid6: avx512x4 gen() 33347 MB/s
ioatdma 0000:00:04.6: enabling device (0004 -> 0006)
ioatdma 0000:00:04.7: enabling device (0004 -> 0006)
raid6: avx512x2 gen() 43294 MB/s
raid6: avx512x1 gen() 49772 MB/s
raid6: avx2x4 gen() 41572 MB/s
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
raid6: avx2x2 gen() 42361 MB/s
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 10:7b:44:4f:1b:ac
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
raid6: avx2x1 gen() 36040 MB/s
raid6: using algorithm avx512x1 gen() 49772 MB/s
raid6: .... xor() 31436 MB/s, rmw enabled
raid6: using avx512x2 recovery algorithm
iTCO_vendor_support: vendor-support=0
e1000e 0000:00:1f.6 eno1: renamed from eth0
block device autoloading is deprecated and will be removed.
xor: automatically using best checksumming function avx
iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Adding 3907017536k swap on /dev/nvme0n1p1. Priority:-2 extents:1 across:3907017536k SS
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
XFS (sda1): Mounting V5 Filesystem 97908743-80e7-4558-a1a1-26be812fd54a
Btrfs loaded, assert=on, zoned=yes, fsverity=yes
XFS (sdi1): Mounting V5 Filesystem d192b487-f75c-4831-990b-f32c55cd3604
XFS (sda1): Ending clean mount
xfs filesystem being mounted at /scratch/work supports timestamps until 2038-01-19 (0x7fffffff)
XFS (sdi1): Ending clean mount
xfs filesystem being mounted at /scratch/software supports timestamps until 2038-01-19 (0x7fffffff)
async_tx: api initialized (async)
md/raid1:md126: active with 2 out of 2 mirrors
FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
md126: detected capacity change from 0 to 3907020416
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:19:00.1: Force to non-snoop mode
snd_hda_intel 0000:67:00.1: Force to non-snoop mode
EDAC skx: ECC is disabled on imc 0
md/raid:md127: device sde1 operational as raid disk 1
md/raid:md127: device sdb operational as raid disk 2
md/raid:md127: device sdf operational as raid disk 0
md/raid:md127: raid level 5 active with 3 out of 3 devices, algorithm 2
intel_rapl_common: Found RAPL domain package
snd_hda_intel 0000:19:00.1: bound 0000:19:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
snd_hda_intel 0000:67:00.1: bound 0000:67:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:64/0000:64:00.0/0000:65:00.0/0000:66:00.0/0000:67:00.1/sound/card2/input15
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:16/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:64/0000:64:00.0/0000:65:00.0/0000:66:00.0/0000:67:00.1/sound/card2/input16
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:16/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:16/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:64/0000:64:00.0/0000:65:00.0/0000:66:00.0/0000:67:00.1/sound/card2/input17
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:64/0000:64:00.0/0000:65:00.0/0000:66:00.0/0000:67:00.1/sound/card2/input18
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:16/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:64/0000:64:00.0/0000:65:00.0/0000:66:00.0/0000:67:00.1/sound/card2/input19
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:64/0000:64:00.0/0000:65:00.0/0000:66:00.0/0000:67:00.1/sound/card2/input20
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:16/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:16/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.1/sound/card1/input14
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
BTRFS: device fsid 73073e56-713b-4ca7-88f5-7110079653e4 devid 1 transid 6152 /dev/sdh2 scanned by mount (1682)
BTRFS info (device sdh2): first mount of filesystem 73073e56-713b-4ca7-88f5-7110079653e4
BTRFS info (device sdh2): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device sdh2): disk space caching is enabled
md127: detected capacity change from 0 to 23442085888
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
XFS (md127): Mounting V5 Filesystem b91ad5a3-2fcb-4968-9897-b57e6b9e965d
EXT4-fs (md126): mounted filesystem 6f6646cc-e86f-40ac-9eca-2492b497127a r/w with ordered data mode. Quota mode: none.
XFS (md127): Ending clean mount
xfs filesystem being mounted at /storage supports timestamps until 2038-01-19 (0x7fffffff)
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 36 processor cores/threads
vboxdrv: TSC mode is Invariant, tentative frequency 2999998854 Hz
vboxdrv: Successfully loaded version 7.0.14 r161095 (interface 0x00330004)
NET: Registered PF_QIPCRTR protocol family
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
amdgpu 0000:19:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
amdgpu 0000:67:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
NET: Registered PF_PACKET protocol family
systemd-journald[1084]: /var/log/journal/2e3002230f0c4994b885f53b302238fb/user-1000.journal: Journal file uses a different sequence number ID, rotating.
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
show_signal_msg: 53 callbacks suppressed
CAEProcessor[33695]: segfault at 8 ip 00007fe9844d5590 sp 00007ffe29c8b798 error 4 in libcaep-common.so[7fe984461000+168000] likely on CPU 18 (core 0, socket 0)
Code: e9 f2 fe ff ff 0f 1f 44 00 00 b8 ff ff ff ff f0 41 0f c1 45 08 e9 d4 fe ff ff b8 ff ff ff ff f0 41 0f c1 45 0c eb c6 90 66 90 8b 47 08 48 85 c0 74 2f 48 8b 38 48 85 ff 74 27 8b 47 10 25 ff
CAEProcessor[34288]: segfault at 8 ip 00007fddb00d5590 sp 00007ffc70485768 error 4 in libcaep-common.so[7fddb0061000+168000] likely on CPU 35 (core 27, socket 0)
Code: e9 f2 fe ff ff 0f 1f 44 00 00 b8 ff ff ff ff f0 41 0f c1 45 08 e9 d4 fe ff ff b8 ff ff ff ff f0 41 0f c1 45 0c eb c6 90 66 90 8b 47 08 48 85 c0 74 2f 48 8b 38 48 85 ff 74 27 8b 47 10 25 ff
CAEProcessor[35974]: segfault at 8 ip 00007f8e8fcd5590 sp 00007fff9a01c4b8 error 4 in libcaep-common.so[7f8e8fc61000+168000] likely on CPU 20 (core 2, socket 0)
Code: e9 f2 fe ff ff 0f 1f 44 00 00 b8 ff ff ff ff f0 41 0f c1 45 08 e9 d4 fe ff ff b8 ff ff ff ff f0 41 0f c1 45 0c eb c6 90 66 90 8b 47 08 48 85 c0 74 2f 48 8b 38 48 85 ff 74 27 8b 47 10 25 ff
CAEProcessor[36204]: segfault at 8 ip 00007ffae80d5590 sp 00007fff184d4c78 error 4 in libcaep-common.so[7ffae8061000+168000] likely on CPU 3 (core 3, socket 0)
Code: e9 f2 fe ff ff 0f 1f 44 00 00 b8 ff ff ff ff f0 41 0f c1 45 08 e9 d4 fe ff ff b8 ff ff ff ff f0 41 0f c1 45 0c eb c6 90 66 90 8b 47 08 48 85 c0 74 2f 48 8b 38 48 85 ff 74 27 8b 47 10 25 ff
perf: interrupt took too long (3141 > 3130), lowering kernel.perf_event_max_sample_rate to 63600
CAEProcessor[25001]: segfault at 8 ip 00007f2f78ed55e0 sp 00007ffe84b46a38 error 4 in libcaep-common.so[7f2f78e61000+168000] likely on CPU 10 (core 17, socket 0)
Code: e9 f2 fe ff ff 0f 1f 44 00 00 b8 ff ff ff ff f0 41 0f c1 45 08 e9 d4 fe ff ff b8 ff ff ff ff f0 41 0f c1 45 0c eb c6 90 66 90 8b 47 08 48 85 c0 74 2f 48 8b 38 48 85 ff 74 27 8b 47 10 25 ff